Trisal , Manama, Bharain 10012
Phone +966 138670307

Diploma in HVAC Design, Drafting & CFD Optimization – 3 Months

This program (Technical & Management) is designed to address the job profile requirements of HVAC Design Engineer relative to the Thermodynamics analysis of HVAC system

The details of the program is as listed below,

At TTRC, we habituate real time training as a methodology and practice instituted upon the trainees to improve their skills and match the job requirements. Our trainees are been made to work on the HVAC projects rigorously with expert supervision to build a bridge between the theoretical knowledge and the practical job work.

WHO SHOULD ATTEND

  • Mechanical Engineers/ Designers/ Draftsman who are responsible for design, drafting, installation, estimation and maintenance of HVAC system for Building & Facilities.
  • MEP Engineers/ Managers including Electrical, Instrumentation Engineers who wish to understand/ supervise Electro‐Mechanical projects
  • Mechanical Engineers at entry or senior level, who wish to streamline their existing knowledge to make a career in HVAC Engineering for Building System

Module 1

  • Introduction to HVAC
  • HVAC Introduction
  • Human Comfort Condition
  • Application of HVAC Systems
  • Thermodynamic Analysis concepts
  • Basic Components
  • Basic Refrigeration Cycle
  • Refrigeration Cycle & its functions
  • Types of Compressors
  • Types of Condensers
  • Types of Expansion Valves
  • Types of Evaporators
  • Properties of Refrigerants and brines
  • Air-Conditioning Equipment`s
  • Classification
  • Window A/C , Split A/C Systems
  • Package A/C Systems
  • VRF/VRV Systems
  • Central Air-Conditioning
  • Chilled Water System
  • DX System
  • Selection of Equipment`s
  • Selection based on Heat Load Results
  • Selection as per Application
  • Selection as per Project Specifications
  • Placing Location of Equipment
  • Air Distribution System
  • Duct – Definition & Classification
  • Aspect Ratio
  • Duct Sizing Methods
  • Duct Sizer
  • Duct Routing & Levels
  • Single Line Drawing
  • Shop Drawing as per SMACNA
  • Selection of Diffusers & Grilles
  • Duct Accessories (Sound Attenuators, VAVs, & VRF systems VD, FD, AD, FC etc.)
  • Selection of Supports & Span
  • Ducting Schematics
  • Static Pressure Calculations
  • Selection of FAN
  • BOQ for Ducting System
  • Product interface (BMS, firefighting, plumbing)
  • Chilled Water/ Hydronic System
  • Concept of Chilled Water System
  • Classification of Piping
  • Design projects/Case studies
  • Introduction to International Drawings
  • Work Flow Chart
  • Setting Levels for Ducting & Piping
  • Complete Shop Drawing Preparation
  • Coordination
  • Drawing Representation & Text Setting
  • Mechanical Room & Sections
  • HVAC Drafting
  • Introduction to Auto CAD
  • Auto CAD Commands
  • HVAC CAD Basics
  • International HVAC CAD Standards
  • Categories of Air Conditioning
  • All air system
  • All water system
  • Air – water system
  • Direct Refrigerant system
  • Psychrometry
  • Psychrometric Chart
  • Properties of Air (DBT, WBT, RH, SH etc.)
  • HVAC Processes
  • Usage of Psychrometric Chart
  • Heat Load Calculations
  • Sources of Heat
  • Building Survey
  • Heat Load Formula
  • Finding U value for Walls, Roof, Glass etc.
  • Finding ΔT (Temperature Difference) value for Walls, Roof, and Glass etc.
  • Ventilation Requirements
  • Infiltration Concept
  • Heat Load Estimate (Manually & Software-HAP)
  • Tonnage (TR) & Air Flow (CFM)
  • GPM Calculations
  • Pipe Sizing of Chilled Water System
  • Valves used in Chilled Water System
  • Pipe Routing & Levels
  • Pump Head Calculation
  • Selection of Pumps
  • Bill of Quantities

 

  • Site Installation
  • Installation Procedures
  • System Balancing
  • Testing & Commissioning
  • Pressure Testing
  • Inspections
  • Safety Measures
  • HVAC Documentation
  • Bill of Quantity
  • Material Submittals
  • Equipment Schedules
  • Technical Schedules
  • Estimation & Costing
  • Tracking List
  • Testing, commissioning
  • handing over Procedures
  • Setting Levels
  • Riser/Schematic Drawings
  • Plant Room Sections
  • Coordination
  • Complete Shop Drawing
  • As-Built Drawings
  • Annotations & Dimensions
  • Achieve complete understanding
  • Legends & Symbols
  • Drafting, GD & T – AUTOCAD
  • Model/Layout Management
  • Scale Setting & Plotting

Module 2

  • CATIA – Structure Modeling
  • CATIA – Surface Modeling
  • CATIA – Sheet Metal Design
  • Clean Room Concepts
  • Energy Management Concepts
  • Product interface (BMS, firefighting, plumbing)
  • Certification and recommendations
  • Design Optimization – ANSYS CFD.
  • CFD Implementation in HVAC
  • Flow through pipes/ducts – Design
  • Flow loss calculations with CFD
  • FVM approach with ANSYS
  • ANSYS WB – Pre-processing– FV Modeling
  • ANSYS WB & ICEM CFD – Meshing
  • Turbulence Modeling – CFD
  • ANSYS CFX – Flow Simulation
  • Result Study & Post processing
  • Project management
  • HVAC-CFD Project/Case Studies.

Software: Carrier HAP /Duct Sizer/Auto CAD-Expert Level/CATIA/ANSYS WB, ANSYS ICEM CFD &ANSYS CFX

Session Timings

  • Batch 1: 10:00AM to 2:00PM (Monday-Friday)
  • Batch 2: 2:30PM to 6:30PM (Monday-Friday)
  • Batch 3: 9:30AM to 1:30PM (only on Saturdays)

 

  • Venue 1:

TTRC – Technology Training & Research Centre

401, 4th floor, Connection point, HAL Airport Exit Rd, Old Airport Rd, Bangalore-17

  • Venue 2:

TTRC – Technology Training & Research Centre

33/148, D-2, Choorapambil Building, Alinchuvadu, Edappally P O, Cochin -24.

  • Venue 3:

TTRC – Technology Training & Research Centre

#303,3rd Floor, Krishna Plaza, Above Hyundai Showroom, Opp. Shadan College of Engineering

Khairtabad, Hyderabad-500004

Placement:

100% Placement Assistance for TTRC Certified Candidate.

TTRC in fact suggests policy of “LET JOBS HUNT YOU.” This stems from the philosophy of making yourself employable by acquiring employability skills.

Evaluation & Joining

Kindly bring ID Proof copy, BE certificate copy & 1 photo at the time of joining.